Media is missing or export fails
Protect source media and the project before trying again.
Applies to: Clipchamp.
Revision 5 · 18 November 2026 · General first-line guidance. Wording varies by version; a symptom is not a confirmed diagnosis.

What does the message mean?
Some rows describe a visible symptom rather than an exact message. Wording marked “varies” may differ on your screen.
| What you see | What it may indicate | What to check |
|---|---|---|
| Missing media / export error (wording varies) | The project may have lost access to a source file, or one export may have failed. | Protect source media and the project before trying again. |
| No message at all | Problems can happen without any message. A blank screen or a missing control is still useful evidence. | Record the visible behaviour, the time and who is affected. Do not guess a code. |

Step-by-step checks
Work in order and stop when it is resolved. If your screen differs, note what is different and ask IT or the owner.
Keep original media
- Do this
- Do not rename, move or delete source files while investigating.
- What you should see
- The originals are untouched.
- Then what?
- If this explains what you see, record it and continue only if the next check still applies.
Read the project warning
- Do this
- Note whether one asset or the whole export is affected.
- What you should see
- You know the scope.
- Then what?
- Record the result without changing settings. Stop if work, data or security could be affected.
Check source access
- Do this
- Confirm the original media is still available in its approved location.
- What you should see
- The source is reachable or not.
- Then what?
- Use only the approved action described here. If it does not match your screen, stop and ask IT.
Contact support with context
- Do this
- Record the error, client and export stage. Do not send confidential media.
- What you should see
- Support has the context.
- Then what?
- If unresolved, contact IT or the owner with sanitised evidence. Do not repeat actions that could duplicate data.
When to stop and contact IT or the owner
- Work could be lost, or you cannot tell which version is current.
- The problem repeats, or a managed setting blocks you.
- A step would change production data, shared connections, permissions or security.
What to put in your support request
The app and version if visible, your device, the time, the exact message, who is affected, and the checks you tried with what you saw. Remove names, addresses and confidential content from screenshots. Never send passwords or MFA codes.
Microsoft reference
Microsoft documentation for this topic (opens a new tab). Some links are product hubs. Official pages may include advanced steps; ask IT before applying them on a managed device.
Related guides
Was this guide helpful? Leave feedback
Tell us what worked, what was unclear, or what is missing. Feedback is private and goes to The Workflow Lab for review. It is not shown publicly and is not an IT support request.
The Workflow Lab is independent of Microsoft and is not your employer’s service desk.